
This customer was creating their own work van and needed help with the electrical installation. They had already fitted the interior boarding and brought the vehicle to Vehicle Installers for onboard power, sockets, controls and additional vehicle equipment.
Our part of the project included a 12V auxiliary system with DC–DC charging, a 300Ah lithium battery, a 2500W inverter and three double mains sockets. We also fitted a control panel, roof-mounted warning beacon and surround-camera system.
Supporting a Customer’s Own Van Build
Not every project needs to be a complete conversion. In this case, the customer was handling their own interior fit-out and wanted us to complete the electrical side of the build.
The boarding shown in the photographs was fitted by the customer. We worked with that existing interior to add the equipment needed for their work van. Vehicle Installers can also cut and supply boarding where required as part of a project.
12V Auxiliary Power and DC–DC Charging
The installation uses a 300Ah lithium iron phosphate auxiliary battery with a DC–DC charger. This provides the onboard energy storage and charging arrangement for the added electrical equipment.
A 2500W inverter supplies mains power to the fitted sockets. The customer’s intended uses included a laptop, drill chargers and other charging equipment, rather than large workshop machinery.
Three Double Mains Sockets
Three double mains sockets were fitted to provide convenient connection points around the working interior.
Having several outlets makes it easier to position chargers and equipment where they are needed. The sockets share the available inverter capacity, so connected equipment still needs to remain within the limits of the complete system.


Accessible Electrical Controls
The fitted controls bring the added electrical functions together inside the van. The photographs show the switch panel, voltage display, accessory outlets and a separate inverter remote display.
Positioning the controls in the interior lining gives the customer access to the system while using the work area.
Roof-Mounted Warning Beacon
A warning beacon was fitted above the rear doors, with its wiring routed through roof cable entry glands. The photographs show both the overall position and the mounting detail.
Surround-Camera Installation
We also fitted a surround-camera system as part of the project. Although we did not capture a full set of camera installation photographs, the system formed part of the customer’s requested vehicle upgrades.
Electrical Work Around Your Conversion
This project shows how we can support a customer who is completing their own work van. The customer supplied and fitted the boarding, while Vehicle Installers handled the electrical installation and associated vehicle equipment.
The result combines onboard power for everyday charging needs with fitted sockets, accessible controls, a warning beacon and camera coverage, ready for the customer to continue developing their working interior.


Explore This Service
Building your own work van and need help with its electrics? Vehicle Installers can support the electrical part of your conversion, including auxiliary power, charging, sockets, lighting and controls.


