
This Volkswagen Crafter tyre van conversion was built around a practical balance of equipment, lighting and cost. The customer chose a petrol air compressor, a 12V auxiliary electrical system with DC–DC charging, and a more affordable tyre machine and wheel balancer.
Standard plywood lining kept the interior straightforward, while side and rear working lights, a beacon and front grille lights completed the installation.
Choosing Where to Spend the Budget
A tyre van conversion does not need every premium option to suit its owner. On this build, the customer selected budget-conscious tyre fitting machinery and standard ply lining, while retaining the power, air supply and lighting features they wanted.
The result was a well-equipped mobile workshop with a simple interior finish. The specification reflected the customer’s priorities rather than choosing the most expensive option for every part of the build.
Tyre Machine and Wheel Balancer
The workshop was fitted with a Redats tyre changer and wheel balancer. These were the customer’s more affordable equipment choices, forming the main working setup inside the van.
The tyre changer sits towards the rear of the workshop, with the wheel balancer and compressor further forward. The layout brings the equipment into one working area while retaining access through the side and rear doors.
Standard Plywood Interior
The van was finished with standard plywood lining, including covers around the wheel arches. This provided a straightforward interior without the additional cost of carpeted wall finishes or upgraded decorative panels.
Keeping the lining simple allowed the customer to direct more of the budget towards the equipment and installation features that mattered to them.


Petrol Compressor and Retractable Air Line
The customer selected a petrol air compressor for this conversion, alongside a retractable air hose reel near the side entrance.
Using a petrol compressor meant the compressor itself did not need to be powered by the auxiliary electrical system. This helped shape the choice of onboard power equipment for the rest of the installation.
The retractable reel gives the air hose a dedicated storage position between jobs and keeps the connection close to the workshop equipment.
12V Power with DC–DC Charging
A 12V auxiliary system with a DC–DC charger was fitted as part of the conversion. This provided the onboard electrical setup alongside the separate petrol-powered air supply.
The electrical installation and compressor choice were considered as parts of the same build, with the specification based on the equipment the customer selected.
Side and Rear Working Lights
Working lights were fitted at the side and rear of the van, providing lighting around the workshop entrances.
The side-mounted light bar sits above the sliding-door opening, while rear spotlights are positioned above the back doors. The lighting package also included a beacon.
Front Grille Lights
The customer also chose front grille lights, adding another exterior detail to the Crafter. Together with the side and rear lights, these formed a fuller lighting package around an otherwise straightforward workshop specification.
A Build Around the Customer’s Priorities
This conversion brought together standard ply lining, affordable tyre fitting equipment, petrol-powered air supply and a 12V electrical installation with DC–DC charging.
It is an example of selecting different specification levels within the same build: keeping some elements simple while including the lighting and equipment features the customer wanted.


Explore This Service
Our tyre van conversion service can help you choose a workshop setup around your equipment, working requirements and budget.
Tell us which features matter most to you, from machinery and air supply to onboard power, lighting and interior finishes.


