White Vauxhall van with additional LED lights fitted across the front grille and lower bumper.

This customer needed additional front grille lights for the requirements of a contracted job site. Vehicle Installers fitted the lights and routed their wiring into the cab, with attention to both the visible mounting and the installation behind the grille.

A small lighting upgrade can involve considerably more work than the finished appearance suggests. Accessing the wiring routes, mounting the lights neatly and reassembling the front of the vehicle are all part of the job.

Access Behind the Grille

For this installation, the front grille and headlamp units were removed to provide access for the wiring work.

Opening up the front of the van allowed us to route the cables behind the exterior panels and towards the cab. The aim was a discreet installation with wiring arranged to resemble the vehicle’s original loom as closely as practical.

Careful Light Positioning

The lights were positioned across the grille and lower bumper area. Their alignment matters to the finished appearance, particularly when several units are fitted across the front of a vehicle.

Our approach considers the mounting positions and cable routes together, rather than treating the lights and wiring as separate jobs.

Front of a Vauxhall van with the grille and headlamps removed during additional light wiring work.Angled view of a Vauxhall van with its bonnet open and front grille removed during light installation.

Mounting Supports Where Suitable

Where the grille design allows, we use plastic mounting supports for our front grille lights. These can avoid the need to drill fixing holes directly into the grille and help keep the lights aligned.

This method is not suitable for every vehicle. The mounting approach depends on the grille shape, available space and the lights being installed.

Routing the Wiring into the Cab

The wiring needs the same attention as the visible lights. We work towards a neat loom with cables routed discreetly through the vehicle and into the cab.

The finished appearance depends on this preparation. Much of the installation is hidden once the grille and headlamps have been refitted.

Why Grille Lights Can Take Half a Day to Fit

Depending on the vehicle and installation, fitting front grille lights and wiring them into the cab can take up to half a day.

The time includes gaining access, positioning the lights, preparing the wiring routes and refitting the removed panels. Although the lights themselves are small, achieving a tidy result involves work across several areas of the vehicle.

Lighting for the Customer’s Site Requirements

This project was arranged around the customer’s need for additional front lighting at their contracted workplace.

When enquiring about a similar installation, send us the vehicle details and the site’s written lighting requirements. That gives us a clear starting point for discussing the equipment and fitting work.

Vauxhall van with the bonnet open and detached grille resting in front during additional lighting installation.Front view of a white Vauxhall van with six additional light units fitted in the grille and lower bumper.

Explore This Service

Need additional lighting for your work van? Our vehicle electrical installation service includes lighting upgrades and wiring work for commercial vehicles.

Send us photographs of your vehicle and details of what you need, including any written lighting specification provided by your workplace or contractor.

Related Articles...

Ready to Plan Your Vehicle Conversion?

Your Van. Your Equipment. Your Business.

Tell us about your vehicle, equipment and working needs. We’ll help you explore a practical setup for your build.